Circulen 2420D Plus

LyondellBasell

Description

Circulen 2420 D Plus is a circular polymer, which contains building blocks from non-mechanical recycling processes converting renewables and organic wastes into new cracker feedstock.
The bio content of recycled cracker feedstock is measured and certified on the Certificate of Analysis.

Circulen 2420 D Plus is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.

Availability

Africa-Middle East, Asia-Pacific, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.25 g/10 min
Density 0.923 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 10 MPa
Dart Drop Impact Strength, F50 250 g
Tensile Strength MD 27 MPa
Tensile Strength TD 25 MPa
Tensile Strain at Break MD 200 %
Tensile Strain at Break TD 500 %
Coefficient of Friction >0.8
Failure Energy 6.5 J/mm
Vicat Softening Temperature (A/50 N) 96 °C
Peak Melting Point 110 °C
Haze (50 µm) <14 %
Gloss (20°) >15
Gloss (60°) >50

Technical Data Sheet

Technical Data Sheet

Process

Blown Film


Resin

Low Density Polyethylene


Applications

Agriculture Film, Bags & Pouches, Heavy Duty Packaging, Liner Film, Shrink Film, Stretch Hood