Circulen 2420K Plus



Circulen 2420 K Plus is a circular polymer, which contains building blocks from non-mechanical recycling processes converting renewables and organic wastes into new cracker feedstock.
The bio content of recycled cracker feedstock is measured and certified on the Certificate of Analysis.

Circulen 2420 K Plus is a non-additivated, low density polyethylene. It is characterized by a good processability.
Films made from Circulen 2420 K Plus exhibit good optical properties. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 4.0 g/10 min
Density 0.924 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 11 MPa
Dart Drop Impact Strength, F50 100 g
Tensile Strength MD 22 MPa
Tensile Strength TD 17 MPa
Tensile Strain at Break MD 300 %
Tensile Strain at Break TD 600 %
Coefficient of Friction >0.7
Failure Energy 3.5 J/mm
Vicat Softening Temperature (A/50 N) 92 °C
Peak Melting Point 111 °C
Haze (50 µm) <8 %
Gloss (20°) >60
Gloss (60°) >105

Technical Data Sheet

Technical Data Sheet


Blown Film, Cast Film, Extrusion Coating, Injection Molding


Low Density Polyethylene


Coatings, Protective, Food Packaging Film, Hygiene Film, Shrink Film, Surface Protection Film