CirculenRenew C14 EP448T is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).
CirculenRenew C14 EP448T is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 EP448T is a nucleated heterophasic copolymer with antistatic additivation used in injection moulding applications.
CirculenRenew C14 EP448T has a high flow, good impact/stiffness balance.
CirculenRenew C14 EP448T is typically used by customers in opaque containers, housewares, toys and closures.
CirculenRenew C14 EP448T
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 48 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Tensile Modulus | 1250 MPa |
| Tensile Stress at Yield | 27 MPa |
| Tensile Strain at Break | % |
| Tensile Strain at Yield | 5 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 5 kJ/m² |
| Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) | 3.5 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) | 2.5 kJ/m² |
| Vicat Softening Temperature (A50) | 151 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 90 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Caps & Closures, Housewares, Opaque Containers, Sports, Leisure & Toys