Dexflex 940D FP BLK



Dexflex 940D FP BLK is a thermoplastic olefinic elastomer (TPO) that is typically used for large automotive exterior painted applications.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 22 g/10 min
Density (23 °C) 0.98 g/cm³
Flexural Modulus (23 °C, 2 mm/min) 1300 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 21 MPa
Multi-axial Impact Strength (23° C, 2.2 m/s, 3.2 mm plaque) 19 J
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet - ISO


Injection Molding


Polypropylene Compounds


Bumpers, Exterior Automotive Applications

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications