Hostacom DRS1017T BLK



Hostacom DRS1017T BLK is a high melt flow, heat stabilized, soft TPO based on LyondellBasell's proprietary Catalloy process. This product has been developed for industrial and automotive applications where a combination of good processability and excellent softness is required. This grade is available in black, pellet form.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 22 g/10 min
Density (23 °C, Method A) 0.89 g/cm³
Flexural Modulus (23 °C) 80 MPa
Tensile Stress at Yield (23 °C) 5.0 MPa
Tensile Strain at Break (23 °C) >500 %
Multi-axial Impact Strength (-40°C, 6.6 m/s, 3.2 mm plaque) 19 J
Shore Hardness (Shore D) 28
Heat Deflection Temperature B (0.45 MPa, Unannealed) 37 °C
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet - ISO


Injection Molding


Polypropylene Compounds


Automotive Parts, Exterior Automotive Applications, Industrial, Underhood

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications