Hostalen QCP 5404 Black



Hostalen QCP 5404 Black is a circular high density polyethylene grade supplied in pellet form for extrusion applications. This grade is characterized by its easy processability.

Hostalen QCP 5404 Black contains at least 95% of post-consumer material (EN 15343) from pre-sorted plastic packaging waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%.

This product is not intended for highly regulated applications including food contact, potable water contact,
medical and pharmaceutical applications.




SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.40 g/10 min
Melt Flow Rate (190 °C/5.0 kg) 1.9 g/10 min
Melt Volume Flow Rate (230 °C/2.16 kg) 0.52 cm³/10 min
Density 0.954 g/cm³
Bulk Density > 0.500 g/cm³
Tensile Modulus 1100 MPa
Tensile Stress at Yield 23 MPa
Tensile Strain at Yield 9 %
FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) 6 hr
Ash < 2 wt %
Melt Temperature 180 - 210 °C

Technical Data Sheet

Technical Data Sheet


Pipe, Sheet and Profile Extrusion


High Density Polyethylene


Drainage Pipe, General Sheet Extrusion, Soil & Waste Pipe