Circulen 2426F Plus

LyondellBasell

Description

Circulen 2426 F Plus is a circular polymer, which contains building blocks from non-mechanical recycling processes converting renewables and organic wastes into new cracker feedstock.
The bio content of recycled cracker feedstock is measured and certified on the Certificate of Analysis. 

Circulen 2426 F Plus is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is
characterized by a good melt strength leading to a good bubble stability during blown film extrusion.
It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.
 

Availability

Africa-Middle East, Asia-Pacific, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.75 g/10 min
Density 0.924 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 11 MPa
Dart Drop Impact Strength, F50 150 g
Tensile Strength MD 24 MPa
Tensile Strength TD 22 MPa
Tensile Strain at Break MD 300 %
Tensile Strain at Break TD 600 %
Coefficient of Friction <0.2
Failure Energy 5.5 J/mm
Vicat Softening Temperature (A/50 N) 96 °C
Peak Melting Point 111 °C
Haze (50 µm) <8 %
Gloss (20°) >40
Gloss (60°) >90
Slip Erucamide 500 ppm
Antiblock Natural Silica 900 ppm

Technical Data Sheet

Technical Data Sheet

Process

Blown Film


Resin

Low Density Polyethylene


Applications

Bags & Pouches, Food Packaging Film, Hygiene Film, Shrink Film