Circulen EP310M HP



Circulen EP310M HP is a circular polymer, which contains building blocks from non-mechanical recycling processes converting renewables and organic or plastic wastes into new cracker feedstock.
The content of recycled cracker feedstock is certified by mass balance.

Circulen EP310M HP is a heterophasic copolymer, used in film applications  for lamination on other substrates where high impact at room and low temperatures is needed. Moreover Circulen  EP310M HP features a good stiffness. This new grade is produced using a non-phthalate catalyst system favored by customers in applications intended for food contact. The film viscosity achieved with Circulen EP310M HP offers good processability on cast lines. This polypropylene heterophasic copolymer exhibits high impact, good puncture, good tear resistance, high seal strength and seal integrity.


Africa-Middle East, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 7.5 g/10 min
Density 0.90 g/cm³
Tensile Modulus 1050 MPa
Tensile Stress at Yield 21 MPa
Tensile Strain at Break %
Tensile Strain at Yield 6 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 45 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) 9 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 7 kJ/m²
Ductile/Brittle Transition Temperature -55 °C
Ball Indentation Hardness 46 MPa
Vicat Softening Temperature (A50) 144 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed) 80 °C

Technical Data Sheet

Technical Data Sheet


Cast Film


Polypropylene, Impact Copolymer


Bags & Pouches, Food Packaging Film, Impact Modification, Lamination Film, Surface Protection Film