Circulen HP483R

LyondellBasell

Description

Circulen HP483R is a circular polymer, which contains building blocks from non-mechanical recycling processes converting renewables and organic or plastic wastes into new cracker feedstock.
The content of recycled cracker feedstock is certified by mass balance.
Circulen HP483R is a polypropylene homopolymer with medium high melt flow rate, for usage in injection molding applications.
Circulen HP483R contains antistatic and slip agents, for easier demolding and low friction. It exhibits a good stiffness combined with a good dimensional stability.
Circulen HP483R is used in caps, closures and thin wall injection molding applications.

Availability

Africa-Middle East, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 27 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1300 MPa
Tensile Stress at Yield 32 MPa
Tensile Strain at Break >50 %
Tensile Strain at Yield 9 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 3 kJ/m²
Ball Indentation Hardness (H 358/30) 68 MPa
Vicat Softening Temperature (A50) 151 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 80 °C

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene, Homopolymer


Applications

Caps & Closures, Furniture, Housewares, Opaque Containers