Moplen EP332K
Description
Moplen EP332K is a polypropylene impact copolymer with an optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage and good thermal ageing stability. Typical customer applications are injection molding of toys, crates, appliances housing, and general housewares.
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
5 g/10 min
Melt Flow Rate (230 °C/2.16 kg)
5 g/10 min
Density
0.90 g/cm³
Density
0.90 g/cm³
Flexural Modulus
1150 MPa
Tensile Modulus
1100 MPa
Tensile Strength at Yield
25 MPa
Tensile Stress at Yield
25 MPa
Tensile Elongation at Yield
9 %
Tensile Strain at Yield
9 %
Charpy Impact Strength - Notched (23 °C)
13 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A)
6.4 kJ/m²
Charpy Impact Strength - Notched (-20 °C)
4.7 kJ/m²
Notched Izod Impact Strength (23 °C)
150 J/m
Deflection Temperature Under Load (0.46 N/mm²)
88 °C