Hostacom M2 U01

Description

Hostacom M2 U01 is a 20% mineral filled PP homopolymer with high melt flow rate. This grade is delivered in natural color version.

Availability

Europe

Product data and technical information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 16 g/10 min

Melt Volume Flow Rate (230 °C/2.16 kg) 18 cm³/10 min

Density (23 °C) 1.04 g/cm³

Flexural Modulus (23 °C, Tech. A) 2700 MPa

Tensile Modulus (23 °C) 2600 MPa

Tensile Stress at Yield (23 °C) 33 MPa

Tensile Strain at Yield (23 °C) 6 %

Charpy Impact Strength - Notched (23 °C) 2.5 kJ/m²

Charpy Impact Strength - Notched (0 °C) 1.5 kJ/m²

Charpy Impact Strength - Unnotched (23 °C) 32 kJ/m²

Charpy Impact Strength - Unnotched (0 °C) 18 kJ/m²

Deflection Temperature Under Load (0.45 MPa, Unannealed) 115 °C

Deflection Temperature Under Load (1.80 MPa, Unannealed) 65 °C

Product Stewardship Bulletin Product Stewardship Bulletin - Americas

Product Stewardship Bulletin - Europe

Product Stewardship Bulletin - Australia and New Zealand

Product Stewardship Bulletin - Africa - Middle East

Product Stewardship Bulletin - Asia - Pacific

Technical Data Sheet Technical Data Sheet

Safety Data Sheet Safety Data Sheet- Global

Marketing Polypropylene

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications