Alathon 9305TC is a high molecular weight high density copolymer with a broad bimodal molecular weight distribution. This resin exhibits high density, stiffness and good processability. Typical applications for wire and cable include cable in conduit.
Alathon 9305TC meets the requirements of the following: ASTM D 1248, Type III, Category 5, Class A, Grade E10; Federal LP390C, Type II, Class H, Category 5, Grade 5.
Alathon 9305TC
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.075 g/10 min |
| Density (23 °C) | 0.949 g/cm³ |
| Flexural Modulus (1% Secant) | 145000 psi |
| Flexural Modulus (1% Secant) | 1000 MPa |
| Tensile Stress at Break | 36.6 MPa |
| Tensile Stress at Break | 5300 psi |
| Tensile Stress at Yield | 23.4 MPa |
| Tensile Stress at Yield | 3400 psi |
| Tensile Elongation at Break | 800 % |
| Thermal Stress Crack Resistance F₅₀ | >2500 hr |
| Environmental Stress Crack Resistance F₅₀ (10% Igepal®, Cond B) | >2000 hr |
| Shore Hardness (Shore D) | 65 |
| Vicat Softening Temperature | 125 °C |
| Vicat Softening Temperature | 257 °F |
| Low Temperature Brittleness F₅₀ | <-76 °C |
| Low Temperature Brittleness F₅₀ | <-105 °F |
| Volume Resistivity | 2.6 x 10¹⁷ ohm*cm |
| Dielectric Constant 1 MHz | 2.33 |
| Dissipation Factor 1 MHz | 0.00007 |
Technical Data Sheet
Technical Data SheetProcess
Wire & Cable
Resin
W&C Polyolefin Compound
Applications
Wire & Cable