Alathon L5876
Description
Alathon L5876 is selected by customers for use in injection blow molding and extrusion blow molding applications where higher gloss than standard HDPE grades is required.
Availability
North America
Product data and technical information
Typical Properties
Melt Flow Rate (190 °C/2.16 kg)
0.74 g/10 min
Density (23 °C)
>=0.956 g/cm³
Flexural Modulus (1% Secant)
195000 psi
Tensile Strength at Yield
4100 psi
Tensile Elongation at Break
>500 %
Tensile Impact Strength
160 ft-lb/in²
Shore Hardness (Shore D)
66
Vicat Softening Temperature
129 °C
Low Temperature Brittleness F₅₀
<-76 °C
Deflection Temperature Under Load (66 psi, Unannealed)
76 °C