CirculenRecover PP189P Ivory



CirculenRecover PP189P Ivory is a circular polypropylene copolymer supplied in pellet form for injection
moulding applications. The grade combines stiffness, high impact and flow. The grade is available in Ivory color
sorted from municipal plastic waste.

According with the requirements of Standard ISO 14021:2016, CirculenRecover PP189P Ivory contains at least
85 % of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic
waste. Filtration level is 150 micron. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%.

This product is not intended for highly regulated applications including food contact, potable water contact,
medical and pharmaceutical applications.





SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 15 g/10 min
Density 0.918 g/cm³
Bulk Density 0.560 g/cm³
Tensile Modulus (23 °C) 800 MPa
Tensile Strength (23 °C) 19 MPa
Tensile Strain at Break (23 °C) 50 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) >30 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) >7 kJ/m²
Ash < 2 wt %

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Impact Copolymer


Containers, Crates, Furniture, Pails