CirculenRecover PP249S Grey

LyondellBasell

Description

CirculenRecover PP249S Grey is a development circular polypropylene copolymer supplied in pellet form for injection moulding applications. The grade combines stiffness, high impact and flow. The grade is available in grey color sorted from municipal plastic waste.

Sustainability
According with the requirements of Standard ISO 14021:2016, CirculenRecover PP249S Grey contains at least 70% of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%.

This product is not intended for highly regulated applications including food contact, potable water contact,  medical and pharmaceutical applications.

Availability

Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 28 g/10 min
Bulk Density 0.520 g/cm³
Tensile Modulus (23 °C) 850 MPa
Tensile Strength (23 °C) 15 MPa
Tensile Strain at Break (23 °C) > 50 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) > 40 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) >6 kJ/m²
Ash 4 wt %

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene, Impact Copolymer


Applications

Containers, Crates, Furniture, Pails