Dexflex 1066-UV YGYA is a thermoplastic olefinic elastomer (TPO) typically used for automotive exterior applications that require durable paintability in large injection molded parts.
Dexflex 1066-UV YGYA
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 7 g/10 min |
| Density (23 °C) | 0.89 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 600 MPa |
| Tear Strength | 560 lbf/in |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 20 MPa |
| Shore Hardness (Shore D) | 57 |
| Mold Shrinkage |
Technical Data Sheet
Technical Data Sheet - ISOProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications