Dexflex 480-UV 848 is a thermoplastic olefinic elastomer (TPO) that is typically used for automotive exterior applications that require excellent low-temperature toughness in large injection molded parts.
|Melt Flow Rate (230 °C/2.16 kg)||9 g/10 min|
|Density (23 °C)||0.91 g/cm³|
|Flexural Modulus (23 °C, 2 mm/min)||1000 MPa|
|Tensile Stress at Yield (23 °C, 50 mm/min)||19 MPa|
Exterior Automotive Applications
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications