Dexflex 711 PCR YZ9A BLACK



Dexflex 711 PCR YZ9A BLACK is a thermoplastic olefinic elastomer (TPO) compounded with postindustrial/ post-consumer recycled materials. It is typically used for use in applications that are black but not color-matched, and that require very good processing characteristics.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 12 g/10 min
Density (23 °C) 0.95 g/cm³
Flexural Modulus (23 °C, 2 mm/min) 1000 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 16 MPa
Multi-axial Impact Strength (23° C, 2.2 m/s, 3.2 mm plaque) 17 J
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet - ISO


Injection Molding


Polypropylene Compounds


Exterior Automotive Applications, Underhood

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications