Skip to main content

Hifax CA 7442 A

Description

Hifax CA 7442 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology.
It is primarily used for exterior and interior trims applications as base building block for technical compounds, in Automotive. It is suitable also for bumpers. It has a high impact performance and reduced shrinkage. The material also exhibits a good processability.
The grade is available in natural pellet form.

Availability

Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America

Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg) 12 g/10 min
Density 0.90 g/cm³
Tensile Stress at Break (23 °C, 50 mm/min) 17 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 19 MPa
Flexural Modulus (23 °C) 1100 MPa
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 35 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 7.5 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 6.5 kJ/m²
Charpy Impact Strength - Notched (-40 °C) 4.5 kJ/m²
Heat Deflection Temperature B (0.45 MPa, Unannealed) 86 °C
Product Stewardship Bulletin Product Stewardship Bulletin - Africa - Middle East
Product Stewardship Bulletin - Europe
Product Stewardship Bulletin - Americas
Product Stewardship Bulletin - Asia - Pacific
Product Stewardship Bulletin - Australia and New Zealand
Technical Data Sheet Technical Data Sheet
Safety Data Sheet Safety Data Sheet- Global
Technical Literature Catalloy Process Resins - Advanced Reactor TPO Technology (Spanish).pdf
Catalloy TPO Resins Brochure (EU).pdf
Product Selection Guide – Catalloy TPO Resins (EAI)
Miscellaneous Catalloy TPO Resins Shine in Photovoltaic Backsheet from RENOLIT.pdf
Marketing Polypropylene
Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications