Skip to main content

Hifax EP3080

Description

Hifax EP3080 is non-filled polypropylene copolymer for injection molding with very high impact strength. The grade features improved processability. The grade is natural, in pellet form.
Hifax EP3080 is currently used by customers for the production of painted bumpers for automotive.

Availability

Africa-Middle East, Europe

Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg) 7.5 g/10 min
Density (23 °C, Method A) 0.89 g/cm³
Flexural Modulus 900 MPa
Tensile Modulus 800 MPa
Tensile Stress at Break 15 MPa
Tensile Stress at Yield 17 MPa
Tensile Strain at Break 500 %
Tensile Strain at Yield 6 %
Charpy Impact Strength - Notched (23 °C) 65 kJ/m²
Charpy Impact Strength - Notched (-20 °C) 15 kJ/m²
Charpy Impact Strength - Notched (-30 °C) 10 kJ/m²
Vicat Softening Temperature (A50) 130 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 80 °C
DSC Melting Point 163 °C
Product Stewardship Bulletin Product Stewardship Bulletin - Australia and New Zealand
Product Stewardship Bulletin - Asia - Pacific
Product Stewardship Bulletin - Americas
Product Stewardship Bulletin - Europe
Product Stewardship Bulletin - Africa - Middle East
Technical Data Sheet Technical Data Sheet
Safety Data Sheet Safety Data Sheet- Global
Technical Literature Catalloy TPO Resins Brochure (EU).pdf
Product Selection Guide – Catalloy TPO Resins (EAI)
Miscellaneous Catalloy TPO Resins Shine in Photovoltaic Backsheet from RENOLIT.pdf
Marketing Polypropylene
Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications