Hifax EP3080G is non-filled polypropylene copolymer for injection molding with very high impact strength. The grade has good UV resistance designed for outdoor applications. The grade is natural, in pellet forms.
Hifax EP3080G is currently used by customers for the production of non-painted bumpers for automotive.
Hifax EP3080G
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 7.5 g/10 min |
| Density (23 °C, Method A) | 0.89 g/cm³ |
| Flexural Modulus | 900 MPa |
| Tensile Modulus | 800 MPa |
| Tensile Stress at Break | 15 MPa |
| Tensile Stress at Yield | 17 MPa |
| Tensile Strain at Break | 500 % |
| Tensile Strain at Yield | 6 % |
| Charpy Impact Strength - Notched (23 °C) | 65 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C) | 15 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 10 kJ/m² |
| Vicat Softening Temperature (A50) | 130 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 80 °C |
| DSC Melting Point | 163 °C |
Technical Data Sheet
Technical Data SheetProcess
Compounding, Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Bumpers
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications