Hostacom PPN 1034 12
Description
Hostacom PPN 1034 12 is an unfilled PP copolymer with medium melt flow rate and good low temperature impact resistance. The product is also available as a customized color matched, pellet form. This grade is delivered in BLACK color version.
Availability
Europe, North America
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/5.0 kg)
13 g/10 min
Melt Volume Flow Rate (230 °C/5.0 kg)
15 cm³/10 min
Density (23 °C)
0.90 g/cm³
Flexural Modulus (23 °C)
1000 MPa
Tensile Modulus (23 °C)
1050 MPa
Tensile Stress at Yield (23 °C)
24 MPa
Tensile Strain at Yield (23 °C)
8 %
Charpy Impact Strength - Notched (23 °C)
50 kJ/m²
Charpy Impact Strength - Unnotched (23 °C)
No Break kJ/m²
Charpy Impact Strength - Unnotched (0 °C)
No Break kJ/m²
Notched Izod Impact Strength (23 °C)
50 kJ/m²
Notched Izod Impact Strength (-30 °C)
4 kJ/m²
Vicat Softening Temperature (B50)
68 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed)
80 °C
Deflection Temperature Under Load (1.80 MPa, Unannealed)
55 °C
Mold Shrinkage
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications