Hostalen GF 4750



Hostalen GF4750 is a high density polyethylene with a good ESCR, containing antioxidants and delivered in pellet form. Target applications are small blow mouldings for packaging of consumer goods, surfactants, detergents and tubes. This grade is not intended for use in medical or pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.4 g/10 min
Melt Flow Rate (190 °C/5.0 kg) 1.5 g/10 min
Melt Flow Rate (190 °C/21.6 kg) 30 g/10 min
Density 0.950 g/cm³
Tensile Modulus 1000 MPa
Tensile Stress at Yield 23.0 MPa
Tensile Strain at Yield 10 %
FNCT (6.0 MPa, 6.6% Dehyton PL, 50 °C) 43 hr
Charpy Impact Strength - Notched (23 °C, Type 1, Notch A) 12.0 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 5.5 kJ/m²
Shore Hardness (Shore D) 60
Ball Indentation Hardness (H 132/30) 44 MPa
Vicat Softening Temperature (B50) 70 °C

Technical Data Sheet

Technical Data Sheet


Extrusion Blow Molding, Injection Blow Molding, Injection Molding


High Density Polyethylene


Bottles For Consumer Goods, Bottles for Industrial Use, Caps & Closures, Collapsible Tubes