ICORENE 3560 SDS 9212
Description
Icorene 3560 is a linear low density polyethylene specifically developed for rotational moulding.
This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
Availability
Europe
Product data and technical information
Typical Properties
Melt Flow Rate (190 °C/2.16 kg)
5.0 g/10 min
Density
0.935 g/cm³
Environmental Stress Crack Resistance (Condition B, F50, 100% Igepal, 50 °C)
>150 hr
Tensile Strength at Yield
17 MPa
Flexural Modulus
550 MPa
Drop Impact Resistance (-20 °C, Internal Method)
170 J/cm
Durometer Hardness (Shore D)
55
Deflection Temperature Under Load Unannealed (264 psi)
36 °C
Deflection Temperature Under Load Unannealed (66 psi)
52 °C
Peak Melting Temperature
125 °C