Indure E1500HG-UV NAT



Indure E1500HG-UV NAT thermoplastic olefinic elastomer (TPO) that is UV-stabilized. It is typically used for high-gloss thermoformed applications where excellent gloss retention after forming is required. It is also typically used as a coextrusion cap layer with other extrusion-grade TPOs from LyondellBasell Advanced Polyolefins.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 2.5 g/10 min
Density 0.90 g/cm³
Flexural Modulus (23 °C, 2 mm/min) 950 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 25 MPa
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet


Extrusion Coating, Injection Molding, Thermoforming


Polypropylene Compounds


Exterior Automotive Applications, Interior Automotive Applications, Panels & Profiles

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications