Indure X225-UV SILH engineered polyolefin material is typically used for large, molded-in-color automotive applications that require ductile impact properties at low temperatures, UV resistance and good processability.
|Melt Flow Rate (230 °C/2.16 kg)||40 g/10 min|
|Flexural Modulus (23 °C, 2 mm/min)||1400 MPa|
|Tensile Stress at Yield (23 °C, 50 mm/min)||26 MPa|
Automotive Parts, Bumpers, Exterior Automotive Applications
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications