Lupolen 1800P



Lupolen 1800P is a low density polyethylene resin used in injection molding and other processing methods. It exhibits high flowability, and good softness, toughness and dimensional stability. Lupolen 1800 P is delivered in pellet form and is not additivated. Lupolen 1800P is used in applications such as compounding, toys, caps & closures, engineering parts, and sports and leisure equipment.

Lupolen 1800P is not intended for use in medical and pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 15 g/10 min
Density 0.918 g/cm³
Tensile Modulus 200 MPa
Tensile Stress at Yield 9 MPa
Environmental Stress Crack Resistance F₅₀ 2 hr
Shore Hardness (Shore D) 45
Ball Indentation Hardness (H 49/30) 12 MPa
Vicat Softening Temperature (A/50) 82 °C
Peak Melting Point 105 °C
Melt Temperature 180 - 230 °C

Technical Data Sheet

Technical Data Sheet


Compounding, Injection Molding


Low Density Polyethylene


Caps & Closures, Sports, Leisure & Toys