Lupolen 1800S



Lupolen 1800S  is a low density polyethylene resin used in injection molding and other processing methods like compounding. It exhibits high flowability, good softness, toughness and dimensional stability. Lupolen 1800S is delivered in pellet form and is not additivated. Lupolen 1800S is used in applications such as toys, caps & closures, engineering parts, and sports and leisure equipment.

Lupolen 1800S is not intended for use in medical and pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 20 g/10 min
Density 0.917 g/cm³
Tensile Modulus 160 MPa
Tensile Stress at Yield 8 MPa
Environmental Stress Crack Resistance F₅₀ 1.5 hr
Shore Hardness (Shore D) 45
Ball Indentation Hardness (H 49/30) 13 MPa
Vicat Softening Temperature (A/50) 81 °C
Peak Melting Point 106 °C
Melt Temperature 180 - 230 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Low Density Polyethylene


Caps & Closures, Sports, Leisure & Toys