Lupolen GX 4087 is a non-stabilized low density polyethylene (LDPE), designed for use in medium voltage power cables using the Direct Peroxide Injection process. To assure high standards of cleanliness a dedicated production procedure is maintained and the product is tested by using online measurements. Sufficient antioxidant should be added to meet specific ageing requirements.
The product is delivered in pellet form and meets the requirements of ASTM D 1248, Type I, Class A, Category 3, Grade E5.
Lupolen GX 4087
Description
Availability
Africa-Middle East, Asia-Pacific, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 1.5 g/10 min |
| Density | 0.919 g/cm³ |
| Tensile Modulus | 200 MPa |
| Tensile Stress at Break | 15 MPa |
| Tensile Stress at Yield | 9 MPa |
| Tensile Strain at Break | 500 % |
| Tensile Strain at Yield | 15 % |
| Shore Hardness (Shore D) | 45 |
| Vicat Softening Temperature (A/50) | 88 °C |
| Peak Melting Point | 108 °C |
| Volume Resistivity | >10E16 ohm*cm |
| Dielectric Constant | 2,3 |
| Dissipation Factor | 0,0002 |
| Dielectric Strength | >22 kV/mm |