Lupolen GX 5038



Lupolen GX 5038 is a new generation hexene linear high-density polyethylene for injection molding. Typical customer applications may include SCR reservoirs (SCR = Selective Catalytic Reduction) and components for automotive fuel tank applications. Lupolen GX 5038 is a pelletized polymer. It is not intended for use in medical and pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 2.0 g/10 min
Density 0.945 g/cm³
Tensile Modulus 900 MPa
Tensile Stress at Yield 22 MPa
Tensile Strain at Yield 10 %
FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) 35 hr
Tensile Impact Strength 100 kJ/m²
Injection Moulding Temperature 190 - 230 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


High Density Polyethylene


Fuel Tanks, Non-fuel Reservoirs