Moplen EP300U



Moplen EP300U is a very high flow heterophasic copolymer used for injection molding.
Moplen EP300U features an excellent balance between easy processing and good impact strength.
The main applications of Moplen EP300U are thin-walled injection moulding applications and technical compounds.


Africa-Middle East, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 70 g/10 min
Density 0.89 g/cm³
Flexural Modulus 1000 MPa
Tensile Stress at Break 15.5 MPa
Tensile Stress at Yield 23 MPa
Tensile Strain at Break 70 %
Tensile Strain at Yield 7 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 7 kJ/m²
Charpy Impact Strength - Notched (0 °C) 4 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 3 kJ/m²
Vicat Softening Temperature (A50) 145 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed) 72 °C
DSC Melting Point 163 °C

Technical Data Sheet

Technical Data Sheet


Compounding, Injection Molding


Polypropylene, Impact Copolymer


TWIM Food Containers, TWIM Non-food Containers