Moplen EP332L
Description
Moplen EP332L is a heterophasic copolymer with medium flow used in injection molding. This grade is characterized by a medium stiffness-impact balance at low temperature as well as a low warpage tendency.
The additive formulation provides a good heat aging resistance.
Moplen EP332L is typically used by customers requiring a high resistance to temperature degradation, in particular for battery cases and automotive components.
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
7 g/10 min
Density
0.90 g/cm³
Flexural Modulus
1200 MPa
Tensile Modulus
1200 MPa
Tensile Stress at Break
17 MPa
Tensile Stress at Yield
26 MPa
Tensile Strain at Break
70 %
Tensile Strain at Yield
8 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A)
9 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A)
6 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A)
3.5 kJ/m²
Vicat Softening Temperature (A50)
148 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed)
84 °C