Moplen EP440M
Description
Moplen EP440M is a high isotacticity polypropylene impact copolymer with an optimized balance of stiffness and toughness, high impact strength at low temperature, high stiffness and low warpage. Typical customer application is injection molding of battery cases.
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
9 g/10 min
Density
0.90 g/cm³
Flexural Modulus
1200 MPa
Tensile Strength at Yield
28 MPa
Tensile Elongation at Yield
6 %
Notched Izod Impact Strength (23 °C)
100 J/m
Notched Izod Impact Strength (-20 °C)
40 J/m
Rockwell Hardness (R-Scale)
97
Vicat Softening Point
150 °C
Deflection Temperature Under Load (0.46 N/mm²)
100 °C