Moplen HP501L is a polypropylene homopolymer for use in injection and compression molding applications.
Moplen HP501L exhibits a good stiffness/impact balance at ambient temperature. It provides good hinge performances on caps, as well as good environmental stress cracking resistance.
Moplen HP501L is used in caps, closures, sprayers, housewares and furniture.
Moplen HP501L
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 6 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Tensile Modulus | 1500 MPa |
| Tensile Stress at Yield | 34 MPa |
| Tensile Strain at Break | >50 % |
| Tensile Strain at Yield | 9 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 4.5 kJ/m² |
| Ball Indentation Hardness (H 358/30) | 74 MPa |
| Vicat Softening Temperature (A50) | 154 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 90 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding, Thermoforming
Resin
Polypropylene, Homopolymer
Applications
Caps & Closures, Housewares