Moplen RP348T HP
Description
Moplen RP348T HP is a random copolymer for injection molding with a clarifier and antistatic based additivation, offering a very good flowability and transparency.
Moplen RP348T HP is typically used in thin walled packaging and appreciated by customers for its good aesthetic appearance. It can be processed at significantly low temperature, allowing energy savings and improved productivity due to reduced cycle times.
Availability
Africa-Middle East, Europe
Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
48 g/10 min
Density (23 °C)
0.90 g/cm³
Tensile Modulus
1100 MPa
Tensile Stress at Yield
29 MPa
Tensile Strain at Break
>50 %
Tensile Strain at Yield
13 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A)
4.5 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A)
2.5 kJ/m²
Vicat Softening Temperature (A50)
130 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed)
70 °C
Haze (1 mm - injection molded disc)
9 %