Skip to main content

POLYFORT FPP 20 T NATURAL

Description

POLYFORT FPP 20 T NATURAL is a 20% talc filled PP-Homopolymer compound

Availability

Africa-Middle East, Asia-Pacific, Latin America, North America

Product data and technical information
Typical Properties
Melt Volume Flow Rate (230 °C/2.16 kg) 9.0 cm³/10 min
Density (Method A) 1.06 g/cm³
Tensile Modulus (1 mm/min, Type 1A) 2600 MPa
Tensile Strain at Yield (Type 1A, 50 mm/min) 6.0 %
Tensile Stress at Yield (Type 1A, 50 mm/min) 33.0 MPa
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 3.0 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 2.0 kJ/m²
Charpy Impact Strength - Unnotched (23 °C, Type 1, Edgewise) 38 kJ/m²
Charpy Impact Strength - Unnotched (-30 °C, Type 1, Edgewise) 14 kJ/m²
Ball Indentation Hardness (H 358/30) 82.0 MPa
Ball Pressure Test (125 °C) Pass
Vicat Softening Temperature (A (10N), 50 °C/h) 152 °C
Vicat Softening Temperature (B (50N), 50 °C/h) 84.0 °C
Deflection Temperature Under Load Unannealed (0.45 MPa) (Flatwise) 109 °C
Deflection Temperature Under Load Unannealed (1.80 MPa) (Flatwise) 58.0 °C
Burning Rate (2.00 mm) <100 mm/min
Burning Rate (2.00 mm) <100 mm/min
Glow Wire Flammability Index (1.5 mm) 725 °C
Glow Wire Flammability Index (3.0 mm) 725 °C
Glow Wire Ignition Temperature (1.5 mm) 750 °C
Glow Wire Ignition Temperature (3.0 mm) 750 °C
Drying Temperature 80 °C
Drying Time 2.0 to 3.0 hr
Processing (Melt) Temp 220 to 260 °C
Mold Temperature 30 to 60 °C
Injection Rate Moderate-Fast
Flammability Classification (1.5 mm) HB
Flammability Classification (3.0 mm) HB
UL File Number (Global) E86615
Technical Data Sheet - APS Injection Technical Data Sheet - APS Injection
Safety Data Sheet Safety Data Sheet- Global
Marketing Polypropylene