Description
Petrothene PP1510PC is selected by customers for use as primary insulation or a jacketing base resin for wire and cable applications. PP1510PC contains antioxidants to help ensure thermal stability during processing and to provide excellent long-term aging properties. It also contains a metal deactivator to prevent degradation while the cable is in service.
Petrothene PP1510PC meets the requirements of the following: ASTM D 4101, Group 03, Class 4, Grade 8; PP0348B44803EO; Federal LP394C, Type IV, Grade B.
Availability
North America
Typical Properties
Melt Flow Rate (230 °C/2.16 kg)
1.3 g/10 min
Density (23 °C)
0.902 g/cm³
Flexural Modulus (1% Secant)
1070 MPa
Flexural Modulus (1% Secant)
155000 psi
Tensile Stress at Break
28.6 MPa
Tensile Stress at Break
4150 psi
Tensile Stress at Yield
3200 psi
Tensile Stress at Yield
22.1 MPa
Tensile Elongation at Break
600 %
Environmental Stress Crack Resistance F₂₀ (100% Igepal®, Cond A)
0 Failures at 7 days hr
Low Temperature Brittleness F₅₀
<-13 °F
Low Temperature Brittleness F₅₀
<-25 °C
Volume Resistivity
2 x 10¹⁷ ohm*cm
Dielectric Constant 1 MHz
2.27
Dissipation Factor 1 MHz
0.0004