Pro-fax 6301



Pro-fax 6301 polypropylene homopolymer is available in spherical particle form.  This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. 

Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders.  Additional stabilization is required to protect the resin during melt processing and throughout its useful life.

Please note that any additives compounded into this resin will require a re-assessment of its FDA status.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 12 g/10 min
Density (23 °C) 0.90 g/cm³
Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) 210000 psi
Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) 1450 MPa
Tensile Strength at Yield (2 in/min) 4900 psi
Tensile Strength at Yield (50 mm/min) 34 MPa
Tensile Elongation at Yield 11 %
Notched Izod Impact Strength (73 °F, Method A) 0.6 ft-lb/in
Notched Izod Impact Strength (23 °C, Method A) 32 J/m
Deflection Temperature Under Load (66 psi, Unannealed) 200 °F
Deflection Temperature Under Load (0.45 MPa, Unannealed) 93 °C

Technical Data Sheet

Technical Data Sheet - ASTM




Polypropylene, Homopolymer


Colour Concentrates, Polymer Modifier, Wood Composites