Pro-fax PF511 radiation resistant, high melt flow, controlled rheology polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers enhanced retention of physical properties and color after radiation sterilization.
This resin resists yellowing and embrittlement after gamma radiation. However, since performance and appearance after radiation sterilization can be sensitive to design and processing choices, the users should verify performance in their application.
Our customers typically use this resin in applications such as medical devices, syringes, and labware.
Pro-fax PF511
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) | 135000 psi |
| Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) | 930 MPa |
| Tensile Strength at Yield (2 in/min) | 4000 psi |
| Tensile Strength at Yield (50 mm/min) | 28 MPa |
| Tensile Elongation at Yield | 15 % |
| Notched Izod Impact Strength (73 °F, Method A) | 0.6 ft-lb/in |
| Notched Izod Impact Strength (23 °C, Method A) | 32 J/m |
| Deflection Temperature Under Load (66 psi, Unannealed) | 190 °F |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Injection Molding
Resin
Polypropylene, Homopolymer
Applications
Labware, Medical Devices