Purell HP570U



Purell HP570U is a polypropylene homopolymer for usage in injection molding applications
Purell HP570U exhibits a high fluidity combined with a high stiffness.
Purell HP570U is extensively applied in 3-part syringes, and closures. Additionally it is used in general injection molding thin-walled warpage-critical applications.
All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 75 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1350 MPa
Tensile Stress at Yield 32 MPa
Tensile Strain at Break >50 %
Tensile Strain at Yield 10 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 2 kJ/m²
Ball Indentation Hardness (H 358/30) 62 MPa
Vicat Softening Temperature (A50) 152 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 80 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Homopolymer


Diagnostic Applications, Healthcare Applications, Labware