Purell PE 3020D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. The grade is used by our customers for small blow mouldings including packaging of pharmaceuticals in blow fill seal technology and injection moulding for medical devices, closures and seals.
Purell PE 3020D
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.3 g/10 min |
| Density | 0.927 g/cm³ |
| Bulk Density | >0.500 g/cm³ |
| Tensile Modulus | 300 MPa |
| Tensile Stress at Yield | 13 MPa |
| Shore Hardness (Shore D) | 51 |
| Vicat Softening Temperature (A50) | 102 °C |
| Peak Melting Point | 114 °C |
Process
Blow, Fill, & Seal, Extrusion Blow Molding, Injection Molding
Resin
Low Density Polyethylene
Applications
Blow-Fill-Seal Applications, Bottles and Vials, Caps & Closures (Healthcare), Collapsible Tubes (Healthcare), Healthcare Applications, Medical Devices, Medical Film