Skip to main content

Sequel 1440 FP GREY AC2

Description

Sequel 1440 FP GREY AC2 engineered polyolefin material is typically used for large automotive exterior applications that require very good impact properties at low temperatures, excellent paintability, and processability.

Availability

North America

Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg) 20 g/10 min
Density (23 °C, Method A) 0.96 g/cm³
Flexural Modulus (23 °C) 1250 MPa
Tensile Stress at Yield (23 °C) 22 MPa
Notched Izod Impact Strength (-40 °C) 4.8 kJ/m²
Mold Shrinkage
Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications