Skip to main content

Sequel 1440-UV R1K3

Description

Sequel 1440-UV R1K3 engineered polyolefin material is typically used for large automotive exterior applications that require ductile impact properties at low temperatures, excellent part appearance, and processability.

Availability

North America

Product data and technical information
Typical Properties
Melt Flow Rate (230 °C/2.16 kg) 26 g/10 min
Density (23 °C) 0.96 g/cm³
Tensile Stress at Yield 17 MPa
Tensile Strain at Break >500 %
Charpy Impact Strength - Notched (23 °C) 26.9 kJ/m²
Charpy Impact Strength - Notched (-20 °C) 9.4 kJ/m²
Notched Izod Impact Strength (23 °C) 24.9 kJ/m²
Notched Izod Impact Strength (-20 °C) 10.0 kJ/m²
Mold Shrinkage
Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications