Sequel 2326 NAT

Description

Sequel 2326 NAT thermoplastic polyolefin material is typically used for molded-in-color automotive interior applications that require energy-management properties.

Availability

North America

Product data and technical information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 15 g/10 min

Density (23 °C) 0.95 g/cm³

Tensile Stress at Yield (23 °C, 50 mm/min) 18.6 MPa

Flexural Modulus (23 °C, 2 mm/min) 1150 MPa

Charpy Impact Strength - Notched (23 °C) 78 kJ/m²

Charpy Impact Strength - Notched (-40 °C) 6.5 kJ/m²

Multi-axial Impact Strength (23 °C, 6.6 m/s, 3.2 mm plaque) 20 J

Multi-axial Impact Strength (-30°C, 6.6 m/s, 3.2 mm plaque) 25 J

Deflection Temperature Under Load (0.45 MPa, Unannealed) 75 °C

Deflection Temperature Under Load (1.80 MPa, Unannealed) 54 °C

Mold Shrinkage

Product Stewardship Bulletin Product Stewardship Bulletin - Australia and New Zealand

Product Stewardship Bulletin - Africa - Middle East

Product Stewardship Bulletin - Asia - Pacific

Product Stewardship Bulletin - Americas

Product Stewardship Bulletin - Europe

Technical Data Sheet Technical Data Sheet

Safety Data Sheet Safety Data Sheet- Global

Marketing Polypropylene

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications