Softell CA 02 A



Softell CA 02 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell`s proprietary Catalloy process technology. It is primarily used for the extrusion, calendering and extrusion blow molding of very soft film and sheet. Softell CA 02 A exhibits outstanding low stiffness, excellent low hardness and very good impact resistance. Softell CA 02 A shows high compatibility to fillers and flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form.


Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.6 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 30 MPa
Tensile Stress at Break 10 MPa
Tensile Stress at Yield No Yield Pt MPa
Tensile Strain at Break 500 %
Tensile Strain at Yield No Yield Pt %
Charpy Impact Strength - Notched (23 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-20 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-40 °C) 9 kJ/m²
Shore Hardness (Shore A) 75
Vicat Softening Temperature (A50) 41 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 38 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet


Calendaring, Compounding, Extrusion Coating, Sheet




Automotive Flooring, Interior Automotive Applications, Polymer Modifier, Single Ply Roofing, Soft Profile & Sheets, Soft Touch Applications, TPO Foils and Skins

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications