Softell CA 7413 A



Softell CA 7413 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology. It is suitable for the extrusion, calendering and extrusion blow moulding of very soft film and sheet as well as for injection moulded parts. Softell CA 7413 A exhibits outstanding low stiffness, excellent low hardness and very good impact resistance. Softell CA 7413 A shows high compatibility to fillers and flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form.


Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 2.5 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 30 MPa
Tensile Stress at Break 8 MPa
Tensile Stress at Yield No Yield Pt MPa
Tensile Strain at Break 600 %
Tensile Strain at Yield No Yield Pt %
Charpy Impact Strength - Notched (23 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-20 °C) No Break kJ/m²
Charpy Impact Strength - Notched (-40 °C) 4 kJ/m²
Shore Hardness (Shore A) 75
Vicat Softening Temperature (A50) 41 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet


Calendaring, Compounding, Extrusion Coating, Sheet




Automotive Flooring, Interior Automotive Applications, Polymer Modifier, Single Ply Roofing, Soft Profile & Sheets, Soft Touch Applications, TPO Foils and Skins

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications