Adflex C 200 F

LyondellBasell

Description

Adflex C 200 F is developed for the central layer of tough, transparent co-extruded cast-film structures. It combines transparency with high softness , a very high toughness even at low temperatures and an excellent compatibility with other polyolefins. It does not contain any slip nor anti-blocking agents. Typical applications of the Adflex C 200 F are co-extruded cast-film for food packaging, hygiene applications, surface protection where the outside layer can be any polyolefin homo or copolymer.

Availability

Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 6 g/10 min
Density (23 °C, Method A) 0.89 g/cm³
Tensile Modulus (23 °C) 200 MPa
Tensile Stress at Break 15 MPa
Tensile Strain at Break 600 %
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 65 kJ/m²
Charpy Impact Strength - Notched (-40 °C) 2 kJ/m²
Shore Hardness (Shore D, 15 sec) 40
Vicat Softening Temperature (A50) 80 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 41 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet

Process

Blown Film, Cast Film, Extrusion Blow Molding, Extrusion Coating, Injection Molding, Thermoforming


Resin

Catalloy


Applications

Bags & Pouches, Barrier Film, Breathable Film, Film Wrap, Food Packaging Film, Lamination Film, Peelable Film, Stationery Film