Adflex C 290 F



Adflex C 290 F is developed for the central layer of tough, transparent co-extruded cast-film structures.
It combines transparency with high softness, a very high toughness even at low temperatures and an excellent compatibility with other polyolefins. It does not contain any slip nor anti-blocking agents.
Typical applications of the Adflex C 290 F are co-extruded cast-film for food packaging, hygiene applications, surface protection where the outside layer can be any polyolefin homo or copolymer.



Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 6 g/10 min
Density 0.88 g/cm³
Flexural Modulus 200 MPa
Tensile Stress at Break 15 MPa
Tensile Stress at Yield 8 MPa
Tensile Strain at Break 600 %
Tensile Strain at Yield 30 %
Charpy Impact Strength - Notched (23 °C) 70 kJ/m²
Charpy Impact Strength - Notched (-20 °C) 15 kJ/m²
Charpy Impact Strength - Notched (-40 °C) 2 kJ/m²
Shore Hardness (Shore D) 38
Vicat Softening Temperature (A/50) 80 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 40 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Cast Film, Extrusion Blow Molding, Extrusion Coating, Injection Molding, Thermoforming




Bags & Pouches, Barrier Film, Breathable Film, Film Wrap, Food Packaging Film, Lamination Film, Peelable Film, Stationery Film