Hifax CA 10 A



Hifax CA 10 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell proprietary Catalloy process technology.  It is suitable for industrial applications where a combination of good processability and excellent softness is required.  It is widely used as building block resin for flexible water-proofing membranes.
Hifax CA 10 A exhibits low stiffness, low hardness and good impact resistance. The grade is available in natural pellet form.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.6 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 90 MPa
Tensile Stress at Break 11 MPa
Tensile Strain at Break 500 %
Shore Hardness (Shore D, 15 sec) 30
Heat Deflection Temperature B (0.45 MPa, Unannealed) 40 °C
DSC Melting Point 142 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Calendaring, Compounding, Extrusion Flat-die, Sheet, Thermoforming, Wire & Cable




Automotive Flooring, Geomembranes, Interior Automotive Applications, Panels & Profiles, Pipe Coating, Polymer Modifier, Single Ply Roofing, Soft Profile & Sheets, TPO Foils and Skins, TPO Residential Flooring, Wire & Cable

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications