Koattro KT MR 05



Koattro KT MR05 is a plastomeric material based on Lyondellbasell technology with unique characteristics and is highly compatible with Polypropylene (PP).

This product blended with PP enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparency and reducing stress whitening.

Koattro KT MR05 is available in free flowing pellet form.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 1.3 g/10 min
Density 0.870 g/cm³
Flexural Modulus (23 °C) <10 MPa
Tensile Strength at Break 12 MPa
Tensile Elongation at Break >800 %
Charpy Impact Strength - Notched (-20 °C) NB kJ/m²
Shore Hardness (Shore A) 60
Compression Set 30 %

Technical Data Sheet

Technical Data Sheet


Blown Film, Calendaring, Cast Film, Compression Molding, Continuous Filament/Spinning, Injection Molding, Spunbond




Appliances, Automotive Parts, Coatings, Protective, Colour Concentrates, Industrial, Polymer Modifier, Products for Use in Property Modification, Sealants, Surface Protection Film